Hikvision AX PRO Series DS-PK1-E-WB Wireless Keypad

Model: DS-PK1-E-WB

Who This Is For

When avoiding cable runs through finished walls or heritage-listed interiors is the priority, the Hikvision AX PRO DS-PK1-E-WB Wireless Keypad gives installers a practical, low-disruption control point for AX PRO alarm systems. Designed for residential and small commercial sites where a second keypad location is needed - a rear entry, a garage, or a storeroom - without the cost of re-cabling, this unit communicates wirelessly with the AX PRO hub and runs on battery power. The IP65 rating makes it suitable for covered outdoor positions as well as indoor use, and the backlit LCD means it is usable in poor lighting. Security consultants specifying AX PRO systems for rental properties, small offices, or multi-entry homes will find the DS-PK1-E-WB a clean solution for adding arming points without structural work.

What This Keypad Actually Does

Who Buys This Model

• Alarm installers adding a second arming point: Sites with a front-door AX PRO panel and a rear or garage entry that needs its own keypad - the wireless design removes the need to run cable through walls or ceilings to the secondary location.
• Small business owners with staff access requirements: Businesses where multiple staff members need individual codes that can be added or removed independently, without changing a shared PIN.
• Property managers specifying AX PRO for rental properties: IP65 rating supports covered outdoor mounting at entry points where a hardwired keypad is not feasible during a tenancy without structural modification.
• Homeowners with elderly or at-risk occupants: The built-in SOS panic function provides a fixed-location emergency alert point that does not rely on a mobile phone or separate panic button device.

Honest Assessment

The DS-PK1-E-WB does its core job well: it adds a flexible, cable-free arming point to an AX PRO system with a clean install process. The IP65 rating, -10 to +55 degrees Celsius operating range, tamper alarm, and multi-user code support are all practical features for real installations rather than marketing additions. The backlit LCD and low-battery indicator reduce day-to-day maintenance calls. Where this unit has limits: it is not a standalone alarm panel and will not function outside of an AX PRO ecosystem - buyers who do not already have an AX PRO hub will need one before this keypad does anything. It also does not provide proximity card or fob access; if a site needs card-based entry management, a different access control product type is more appropriate. Available through Security Australia as part of the broader AX PRO peripheral range, this keypad suits sites where a second code-entry point is needed without running new cable.

Before You Buy

Quick Fit Check

• Good match if: You already have a Hikvision AX PRO hub installed and need to add a second arming point at a rear entry, garage, or covered outdoor location without running cable through finished walls.
• Good match if: Your site has multiple users who each need an individual PIN, and you need the ability to add or remove individual codes without resetting a shared access code - supported by the multi-user code management on this model.
• You may need a different model if: Your site requires card, fob, or biometric-based access control rather than PIN entry - a dedicated access control reader or intercom with card reader capability will be more appropriate for that requirement.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You have an AX PRO hub and need a cable-free secondary arming point with multi-user PIN management and IP65 outdoor suitability - the wireless operation and battery power remove the need for any cabling at the keypad location.
• You may need a different model if: Your site requires card- or fob-based access rather than PIN entry, or if you need a keypad that operates as a standalone alarm panel rather than as a peripheral within an existing AX PRO system.
• Pairs well with: Hikvision AX PRO wireless alarm hub, AX PRO wireless PIR detectors, and AX PRO wireless door and window contact sensors for a fully wireless alarm deployment.

Common Questions

1. Will this keypad work with any Hikvision alarm panel, or only the AX PRO?

   Only the AX PRO series. The DS-PK1-E-WB is designed specifically for the Hikvision AX PRO wireless alarm ecosystem and uses the AX PRO's proprietary wireless protocol. It will not enrol into other Hikvision alarm ranges or third-party panels. Confirm your hub model is AX PRO series before purchasing.

2. Does this keypad need a power cable or a data cable installed?

   No. The DS-PK1-E-WB is battery operated using CR123A batteries and communicates wirelessly with the AX PRO hub. There is no requirement to run mains power or a data cable to the keypad mounting location, which is the primary installation advantage of this model.

3. Can I mount this keypad outdoors?

   Yes, in covered outdoor positions. The IP65 rating means the unit is protected against dust ingress and low-pressure water jets, and the operating temperature range of -10 to +55 degrees Celsius covers Australian conditions. It should not be mounted in a position with direct rain exposure or prolonged direct sunlight beyond its rated temperature ceiling.

4. How many user codes can be assigned to this keypad?

   The DS-PK1-E-WB supports multiple user access codes managed through the AX PRO system. The exact maximum number of user codes is determined by the AX PRO hub configuration rather than by the keypad itself. Administrators assign and revoke codes centrally through the AX PRO platform, with each user receiving an individual PIN.

5. What happens if someone tries to remove or tamper with the keypad?

   The tamper alarm triggers. The DS-PK1-E-WB includes a built-in tamper detection mechanism that activates if the unit is removed from its wall mount or if the housing is interfered with. This event is reported back to the AX PRO hub and treated as a tamper alert, the same as with other AX PRO wireless peripherals.

6. Does this keypad support a panic or duress function?

   Yes. The DS-PK1-E-WB includes a built-in SOS panic function that sends an emergency alert through the AX PRO system when activated. This is a fixed-location panic point rather than a portable device. It is suitable for reception areas, bedrooms, or any location where a stationary emergency alert trigger is useful. Stocked as part of the Security Australia AX PRO peripheral range, it is one of the few wireless keypads in this category with a confirmed integrated panic input.

7. How will I know when the batteries need replacing?

   The backlit LCD displays a low-battery warning when charge drops to a level requiring attention. This is a proactive alert rather than a sudden failure notification, giving time to arrange battery replacement before the keypad loses power. CR123A batteries are widely available from electronics and hardware retailers across Australia.

Downloads & Resources

No downloads available for this product.