Dahua DH-AC-PFA102 Dahua Mount Adapter

Model: DH-AC-PFA102

Who This Is For

Property managers specifying Dahua camera installations where a conduit or pendant pipe feed is part of the mounting arrangement will find the DH-AC-PFA102 a necessary component. This aluminium mount adapter bridges Dahua cameras to G1 1/2-inch pipe thread mounts, covering scenarios where a camera needs to be positioned on a pendant arm, ceiling-mounted conduit drop, or junction box with a threaded pipe stub. At 169mm in diameter, it provides a broad base plate that conceals the ceiling cutout or junction box face cleanly. The adapter handles up to 3.0kg of load bearing, which suits the weight range of most Dahua dome and turret cameras. Whether the install is in a commercial ceiling, a car park, or a covered external soffit with existing conduit infrastructure, the PFA102 keeps the finish tidy and the camera stable without requiring custom fabrication or third-party hardware.

What This Accessory Actually Does

Who Buys This Model

• CCTV Installers: Professionals building out Dahua camera systems that incorporate pendant arms or ceiling conduit drops - where the G1 1/2-inch thread on the adapter mates directly with existing mounting hardware.
• Commercial Fit-Out Contractors: Builders or electricians running conduit to camera locations in commercial ceilings who need a tidy adapter plate to bridge conduit infrastructure to the camera body.
• Facility Managers Upgrading Cameras: Sites replacing older cameras on existing pendant or conduit mounts, where the PFA102 allows the new camera to connect to the existing pipe without replacing the entire mount assembly.
• Car Park and Warehouse Installers: Projects with exposed ceiling structures where cameras mount off pendant drops, and where the 169mm base plate provides a professional finish against concrete soffits or painted structural steel.

Honest Assessment

The DH-AC-PFA102 does one job: it provides a clean, structurally sound interface between a G1 1/2-inch threaded pipe mount and a Dahua camera. The aluminium construction, 3.0kg load rating, and large base plate coverage make it a well-specified component for professional installations. The -40°C to +60°C temperature range means it is not restricted to indoor use. These are confirmed, practical attributes for the right application. What it will not do is adapt to non-Dahua cameras that use different mounting patterns, nor will it work with pipe threads outside the G1 1/2-inch specification - installers needing a different thread size should check the broader accessory range available through Security Australia before ordering. It is also not a wall bracket, corner mount, or pole clamp - it is specifically an adapter plate for pipe-threaded pendant or conduit mounting arrangements.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a Dahua camera onto an existing G1 1/2-inch pendant arm or conduit drop and need a clean, load-rated adapter plate to complete the assembly.
• Good match if: Your install requires a large base plate to cover a ceiling junction box or rough cutout - the 169mm diameter handles most standard openings without a visible gap.
• You may need a different model if: Your mounting point uses a thread size other than G1 1/2-inch, or you need a wall bracket, corner mount, or surface mount solution - a different accessory type from the Dahua mounting range will be more appropriate.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your installation uses a G1 1/2-inch threaded pipe, pendant arm, or conduit drop as the mounting point for a Dahua camera, and you need a load-rated aluminium adapter plate to complete the assembly.
• You may need a different model if: Your pipe thread is a different size, or your mounting scenario calls for a wall bracket, corner mount, pole clamp, or junction box mount - a different accessory type from the Dahua mounting range will be the right fit.
• Pairs well with: Dahua pendant mount arms, ceiling junction boxes with threaded conduit stubs, and Dahua dome or turret cameras with a camera weight below 3.0kg.

Common Questions

1. Will the DH-AC-PFA102 fit my existing pendant arm or conduit drop?

   Only if your pipe thread is G1 1/2-inch. This adapter is built specifically for that thread size and will not mate with G3/4-inch, 1-inch, or metric equivalents without modification. Check the thread specification on your existing mount hardware before ordering.

2. What is the maximum camera weight this adapter can support?

   The rated load bearing is 3.0kg. Most Dahua dome and turret cameras fall well within this limit, but you should check the camera's datasheet weight figure before pairing it with this adapter. Exceeding the load rating risks joint failure over time, particularly in vibration-prone environments.

3. Can I use this adapter outdoors?

   Yes, within limits. The aluminium construction and -40°C to +60°C operating temperature range make it suitable for covered outdoor positions such as car park soffits, covered loading docks, and building eaves. It is not independently IP-rated as a sealed enclosure, so direct exposure to rain and water ingress at the pipe entry point should be managed with appropriate conduit sealing.

4. Does this adapter work with non-Dahua cameras?

   Not reliably. The G1 1/2-inch pipe thread side is a standard size, but the camera-side mounting pattern on the PFA102 is designed for Dahua cameras. Non-Dahua cameras are unlikely to share the same mounting footprint. The adapter is part of the Dahua accessory range stocked by Security Australia and is specified for use within the Dahua ecosystem.

5. Will the 169mm base plate cover my ceiling junction box?

   In most cases, yes. Standard single-gang and two-gang ceiling junction boxes are considerably smaller than 169mm in diameter, so the base plate will cover the opening and any surface damage around the cutout. If your junction box or ceiling opening is unusually large, measure the exposed area before ordering.

6. Does this adapter include cables or fixings?

   No. The DH-AC-PFA102 is the adapter plate and pipe thread assembly only. Cabling, conduit, fixing screws for the ceiling surface, and the camera itself are separate items. Check your full bill of materials against your specific install before ordering.

Downloads & Resources

No downloads available for this product.