8MP Hikvision Colorvu HYBRID CCTV Kit: 6 x Liveguard Cameras + 8CH M Series NVR / 4TB

Model: 6x DS-2CD2387G2H-LISU/SL + DS-7608NI-M / 4TB Hybrid Kit

Who This Is For

When full-colour night vision, active deterrence, and AI-filtered alerts all need to land in a single purchase decision, this Hikvision 8MP ColorVu Hybrid Kit is the configuration worth shortlisting. Designed for installers and security-conscious property owners who want a complete, out-of-the-box system, the kit pairs 6 x DS-2CD2387G2H-LISU/SL turret cameras with an 8-channel M Series NVR and 4TB of onboard storage. The cameras combine Smart Hybrid Light - automatically switching between infrared and white light - with a built-in strobe and speaker for on-camera deterrence the moment AcuSense detects a human or vehicle. That combination suits residential properties, small commercial sites, and light industrial yards where reducing false-alarm fatigue matters as much as recording quality. The 8MP resolution and 130dB WDR keep footage usable across mixed-lighting environments, and PoE powering simplifies the cable run from NVR to camera.

What This Kit Actually Does

Who Buys This Model

• Residential installers on higher-spec projects: Clients who have experienced false alarm overload with basic motion-detection cameras, and specifically want AcuSense filtering combined with colour-at-night imaging across all 6 positions.
• Small business owners covering multiple zones: Retail stores, cafes, or workshop owners who need cameras covering a car park, rear lane, entry, and interior simultaneously - and want the NVR, cameras, and storage bundled rather than specified separately.
• Property managers on rental or strata sites: Sites where tenants or residents have raised concerns about night-time activity, and where active deterrence (strobe and audio) needs to be visible and audible without human intervention.
• Light industrial and warehouse operators: Facilities with after-hours vehicle movements across yards or loading areas, where distinguishing a vehicle entering at 2am from wind-triggered motion is the primary driver for upgrading from legacy CCTV.

Honest Assessment

This kit is strong where active deterrence and colour-at-night recording are the brief. The combination of AcuSense filtering, Smart Hybrid Light, strobe, and built-in speaker across all 6 cameras is a genuinely differentiated specification at this price point - not a feature reserved for the top unit while the remaining cameras are basic. The 8MP resolution holds up in post-incident review, and the pre-matched 4TB NVR removes the compatibility guesswork that catches out buyers who specify components separately. Available through Security Australia, the kit ships as a complete system ready for install. Where it has limits: the 2.8mm fixed lens gives a wide field of view but a recognition distance of 17 metres, so it is not suited to long driveways or perimeter monitoring where a 4mm or 6mm lens would be more appropriate. For those scenarios, a bullet-format camera with a longer focal length or motorised zoom is a better fit. The 8 camera channels also cap out the NVR if the site eventually needs more than 8 positions.

Complete Package Contents

• 6 x Hikvision DS-2CD2387G2H-LISU/SL - 8MP ColorVu Turret Camera, 2.8mm fixed lens, AcuSense, Smart Hybrid Light, built-in strobe and speaker, two-way audio, IP67, PoE 802.3af
• 1 x Hikvision DS-7608NI-M 8-Channel M Series NVR - 8 PoE channels, 4TB HDD pre-installed, H.265+, 2 spare channels for expansion

Before You Buy

Quick Fit Check

• Good match if: You need 6 camera positions, all requiring full-colour night vision and active deterrence, and want a pre-matched NVR and storage bundle rather than specifying each component separately.
• Good match if: False alarm fatigue from standard motion detection is the primary complaint on site - AcuSense human and vehicle classification cuts notification events to targets that genuinely matter.
• You may need a different model if: Any camera position needs to cover an approach longer than 17 metres at recognition level, or the site will eventually require more than 8 camera channels - in those cases, look at cameras with motorised zoom lenses or a higher-channel NVR from the range on securityaustralia.com.au.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need active deterrence (strobe and speaker) built into every camera in the kit, combined with full-colour night imaging and AI-filtered alerts - not just recording.
• You may need a different model if: Your site has long entry approaches where identification beyond 17 metres is required, or you need more than 8 camera positions - in either case, look at kits with motorised zoom cameras or a higher-channel NVR from the range on securityaustralia.com.au.
• Pairs well with: A PoE network switch if camera runs exceed the NVR's built-in PoE ports, or a UPS battery backup unit to maintain recording and deterrence during power outages.

Common Questions

1. Does this kit record in colour at night without external lighting?

   Yes. The DS-2CD2387G2H-LISU/SL uses a 1/1.8" ColorVu sensor with a minimum illumination of 0.0005 Lux for colour imaging. In practice, that means colour video is maintained in very low ambient light conditions - street lighting, moonlight, or spill from a building is typically sufficient. The camera also carries a built-in white light that activates when the Smart Hybrid Light system determines additional illumination is needed.

2. Will the strobe and speaker activate automatically when someone is detected?

   Yes, but only after AcuSense is configured correctly on the NVR or camera interface. The strobe and speaker are triggered by AcuSense human or vehicle classification events - not by standard motion detection. During commissioning, the detection rules and linked actions must be enabled. If this step is skipped, the deterrence outputs will not fire automatically.

3. Does this system support two-way audio?

   Yes. Each DS-2CD2387G2H-LISU/SL has a built-in microphone and speaker, and the camera supports two-way audio. This allows a user monitoring via the Hik-Connect app or NVR interface to speak through the camera to someone on-site. All 6 cameras in this kit include this capability - it is not limited to a single unit.

4. How far can these cameras actually identify a person or read detail at 2.8mm?

   The DORI figures for the 2.8mm lens are: Detection 89 metres, Observation 35 metres, Recognition 17 metres, Identification 8 metres. In practical terms, you can confirm a person is present at 89 metres, observe their general appearance at 35 metres, recognise distinguishing features at 17 metres, and positively identify at 8 metres. For positions where identification beyond 17 metres matters - such as a long driveway or a wide-open gate - a camera with a longer focal length is more appropriate.

5. How long will 4TB of storage last with 6 cameras recording at 8MP?

   Storage duration depends on recording mode, frame rate, and scene activity. H.265+ compression on each camera significantly reduces file size compared to H.264 by reducing bitrate during low-activity periods. With H.265+ enabled, motion-event-only recording, and typical residential or small commercial scenes, 4TB will generally support several weeks of storage across 6 cameras - continuous 24/7 recording at full resolution and frame rate will reduce that figure. The NVR can be configured for motion-triggered or scheduled recording to extend retention.

6. Does this kit work with Hik-Connect for remote viewing?

   Yes. The DS-7608NI-M NVR and the DS-2CD2387G2H-LISU/SL cameras are compatible with Hik-Connect for remote live view, playback, and event notifications via iOS or Android. The NVR registers with Hik-Connect using a QR code scan, and all 6 cameras are accessible through the single NVR connection - no need to add each camera individually to the app.

7. Can I add more cameras to this system later?

   Yes, up to a total of 8 cameras. The DS-7608NI-M is an 8-channel NVR and this kit uses 6 channels, leaving 2 spare. Beyond 8 cameras, the NVR is at capacity - a higher-channel NVR model would be required for further expansion. Security Australia stocks a range of Hikvision NVRs if your site requirements grow. Additional cameras added must be PoE-compatible and within the NVR's total power budget.

Cabling Considerations

• Cable Type: Cat5e minimum, Cat6 recommended for runs over 60 metres or in environments with electrical interference.
• Max Cable Run: 100 metres per PoE run from NVR port or PoE switch to camera, per IEEE 802.3af standard. Runs exceeding 100 metres require a PoE extender or midspan injector.
• PoE Notes: Each DS-2CD2387G2H-LISU/SL draws power via IEEE 802.3af PoE. When the strobe and speaker are active simultaneously, confirm the NVR's total PoE power budget across all 6 ports is sufficient - or use a dedicated external PoE switch with a higher power budget if needed.
• Wiring Tips: Route cables through conduit in outdoor or high-traffic areas to protect from UV degradation and physical damage. Pre-pull Cat6 to all 6 camera positions before mounting cameras to avoid rework. Terminate connectors with a quality crimp tool and test each run with a cable tester before powering on the NVR.

Downloads & Resources

No downloads available for this product.