the Resolution of Your Hikvision NVR
If you’ve changed the resolution of your Hikvision NVR and it no longer displays on connected screens, you can reset the NVR to its default settings to resolve this issue. Follow these steps to restore the default settings:
Step-by-Step Instructions
-
Open the SADP Tool:
- Download and launch the SADP Tool from Hikvision's website. This tool will display the IP address of your NVR, which you can find next to the NVR model number.
-
Access the NVR via a Web Browser:
- Enter the IP address of the NVR into your web browser’s address bar to access the NVR’s interface.
-
Log In:
- Enter the username and password for the NVR to log into the system.
-
Restore Default Settings:
- Navigate to SYSTEM > MAINTENANCE > DEFAULT. Here, you can restore all parameters to their default settings.
By following these steps, your NVR should revert to the original factory settings, allowing you to regain access and adjust the resolution as needed.
For additional information and resources, consult the official Hikvision User Manual. This document provides detailed guidance on managing and configuring your Hikvision devices.
If you have any questions or require further assistance, feel free to reach out for support!