Hikvision CCTV Cameras to a Hikvision Intercom Monitor
Yes, you can add Hikvision CCTV cameras to a Hikvision intercom monitor, allowing remote viewing for enhanced security. A standard Hikvision room station can support up to 16 cameras, but typically, only one camera can be viewed at a time.
Setup Instructions for Gen1 and Gen2 Intercoms
For Gen1 Intercoms:
- Follow the guidelines outlined in the document: [Gen1 Intercom – Tech Note: Adding IP Cameras to Room Station](insert link here).
For Gen2 Intercoms: Here’s how to configure your Gen2 intercom to add Hikvision CCTV cameras:
Step-by-Step Instructions
Step 1: Identify the NVR’s IP Address
- Utilize the SADP Tool to find the IP address of your NVR. Download the SADP Tool from the official Hikvision website.
Step 2: Use iVMS-4200 for Configuration
- Download and install the iVMS-4200 software if you haven't already. Add the room station to iVMS.
- Once the room station is added, follow the screenshot instructions in the software to properly configure the camera settings.
Conclusion
By setting up your Hikvision intercom monitor in this way, you can seamlessly integrate CCTV cameras, enabling added security features and monitoring capabilities.
For detailed instructions and additional assistance, refer to the official Hikvision User Manual.
If you have any further questions or need support, please don’t hesitate to reach out!