How can I connect a Hikvision IP camera to an NVR using a PoE switch?

a Hikvision IP Camera to a Hikvision NVR via a PoE Switch

Integrating a Hikvision IP camera with a Hikvision NVR using a Power over Ethernet (PoE) switch is a straightforward process. Here’s a step-by-step guide to help you set it up effectively:

Step-by-Step Instructions

  1. Connect the PoE Switch:

    • Position your PoE switch in a suitable location near your NVR and cameras.
    • Power on the PoE switch and ensure it is connected to a reliable power source.

  2. Connect the IP Camera to the PoE Switch:

    • Use an Ethernet cable to connect the Hikvision IP camera to one of the PoE ports on the switch. This cable will provide both power and data connectivity to the camera.

  3. Connect the NVR to the PoE Switch:

    • Connect another Ethernet cable from the NVR’s network port to one of the regular LAN ports on the PoE switch. This allows the NVR to communicate with the camera.

  4. Power On the Devices:

    • Ensure that both the IP camera and the NVR are powered on. If they are connected properly, the camera should automatically receive power from the PoE switch.

  5. Log into the NVR:

    • Access the NVR's interface through a web browser or directly via a connected monitor by entering the NVR’s IP address or using the display interface.

  6. Add the Camera to the NVR:

    • In the NVR interface, navigate to Configuration > Camera Management.
    • Click on Add Camera (or similar option available).
    • The NVR will search for connected cameras on the network. Once the IP camera appears in the list, select it and confirm the addition.
    • Enter the camera's username and password if prompted (default is usually "admin" for both).

  7. Save Your Settings:

    • After successfully adding the camera, ensure to save any changes made within the NVR settings.

  8. Verify Camera Functionality:

    • Go back to the live view tab on the NVR to check the video feed from the newly added camera. Adjust camera settings and recording options as needed.

Conclusion

By following these steps, you can successfully add a Hikvision IP camera to your Hikvision NVR via a PoE switch. This setup allows for efficient power management and streamlined data transmission.

For further detailed guidance and specifications, refer to the official Hikvision User Manual.

If you have any questions or need assistance with your installation, feel free to reach out!

Leave a comment

Back to blog