Setting up a wireless keypad with your Hikvision AX PRO Wireless Control Panel enhances your security system by providing an easy way to arm, disarm, or control your system remotely. Here’s how to configure the wireless keypad:
Step-by-Step Instructions
-
Power On the Keypad:
- Ensure that the wireless keypad is powered on and ready for configuration. Check the battery or power source to make sure it’s functioning properly.
-
Access the AX PRO Control Panel:
- Log in to your AX PRO Wireless Control Panel through the web interface or app.
-
Navigate to Device Management:
- Go to the Configuration tab in the control panel interface.
- Select Device Management from the menu options.
-
Add the Wireless Keypad:
- Click on the option to add a new device. You may see a section specifically for adding wireless devices.
- Follow the prompts to put the wireless keypad into pairing mode (usually involves pressing a specific button) and ensure it is detected by the control panel.
-
Input Keypad Information:
- Once the keypad is detected, you may need to enter information such as the device name for easy identification.
- Configure any specific settings related to how you want the keypad to function (e.g., arming modes).
-
Save Your Settings:
- After entering all necessary information and configurations, make sure to save the settings.
-
Test the Keypad:
- Try using the keypad to arm and disarm the system to ensure proper functionality and connection.
Hikvision User Manual For AX PRO Configuration
- Try using the keypad to arm and disarm the system to ensure proper functionality and connection.
Conclusion
By following these steps, you can successfully configure your wireless keypad with the AX PRO Wireless Control Panel, enhancing your overall security management.
For additional instructions and detailed information, refer to the official Hikvision User Manual which provides comprehensive guidance on using the AX PRO system.
If you have any further questions or need assistance, feel free to reach out!