How can I set up a wireless repeater for the AX PRO control panel?

Wireless Repeater in AX PRO Wireless Control Panel

Setting up a wireless repeater with your Hikvision AX PRO Wireless Control Panel can enhance the coverage and connectivity of your security system. Here’s a step-by-step guide to help you configure the wireless repeater:

Step-by-Step Instructions

1. Power On the Repeater:

   • Connect the wireless repeater to a power source and ensure it is turned on.

2. Access the AX PRO Control Panel:

   • Log into the AX PRO Wireless Control Panel using a web browser or mobile app.

3. Navigate to Network Settings:

   • Once logged in, go to the Configuration tab.
   • Select Network and then choose the Wireless settings option.

4. Set Up the Repeater:

   • In the wireless settings, look for an option to add or configure a repeater.
   • Follow the prompts to enter the repeater’s details, such as SSID (network name) and password, if required.

5. Connect the Repeater:

   • Ensure that the repeater is configured to connect to your existing wireless network. It should be able to recognize your primary network and establish a connection.

6. Save Settings:

   • After entering the necessary information, save your configurations to apply the settings.

7. Test the Connection:

   • Once the repeater is set up, verify its connection by checking the signal strength and ensuring devices connected to the repeater can communicate with the NVR and other devices.
     
     Configure Wireless Repeater in AX PRO Wireless Control Panel

Conclusion

By following these steps, you can successfully configure a wireless repeater with your AX PRO Wireless Control Panel, enhancing the range and connectivity of your surveillance system.

For more detailed information and additional resources, refer to the official Hikvision User Manual for comprehensive guidance on your AX PRO system setup.

If you have any further questions or need assistance, feel free to reach out!