This FAQ deals with one of our most common questions.
"I've just bought a Hikvision IP kit from you - what do I do?"
What you need:
- the Hikvision camera/s
- The Hikvision NVR
- Precrimped CAT6 Cables or an installer who supplies the CAT6 cables (with RJ45 ends). (1 per camera and 1 from the NVR to the modem)
- A monitor or TV (with VGA or HDMI connections) (you can buy a 22' 1080p monitor from officeworks for $98)
Steps:
- Run the CAT6 cables to the locations you require (1 per camera). The cables should come back to the location where your NVR is located
- Connect & install the cameras to one end of the cable and connect the other end to the NVR
- Plug in the monitor via a VGA or HDMI cable to the NVR
- Connect a cable from the NVR to the modem (if you wish to do remote viewing)
- Turn on the NVR / Monitor - you should see a setup screen.
- Ensure you write down the username / password you choose. Its a pain in the bum to reset.
- After setup, you should see your cameras on the screen!
- To set up remote viewing, https://securityaustralia.com.au/faq-items/can-use-hik-connect-set-remote-viewing/ (this is a useful video https://www.youtube.com/watch?v=sNtB7Cjm7HY) If you get stuck at this step, please consult an IT professional as it could be your modem or other issue.
Our other FAQ articles are good for troubleshooting
https://securityaustralia.com.au/faq-items/ or you can try Googling / Youtubing the problem.
If you still can't resolve your issue, please email us - support@securitywholesalers.com.au. Please be as detailed as possible regarding the issue.
